Design 421
Design 413
Radius Edge Flat Center
Standard Domed Profile

Knife Edge

Flat Edge Domed Center
  • Any grooving tool can be used to create grooves for 2 tone or for millgrain.
  • Multiple tools can be used on the same design.
  • Any profile can have grooving added.
Angled Edge

Flat Edge Concave Center 

Mill Grain Domed
Design 419

Concave Center

Flat Edge Domed

Concave Center with Flat

Domed Edge Flat Center

Standard Domed Profle

Concave Center With Flat

Single Mill Grain Knife Edge Center

Multi Hoop

Angled Edge Flat Center

Concave Center with Dome 

Knife Edge Profile
Design 411

Flat Top or Blank

Domed With Radius Edge

Large Full Radius Edge Flat Center

Check out our

facebook page

Flat Edge Flat Center

Double Mill Grain Knife Edge Center

Angle Edge Concave Center 

Double Mill Grain Domed Center

RINGTECH


®

Flat Edge Domed Center

Design 412

Single Mill Grain Domed Center

Concave Center Domed

Groove Examples

Domed With Radius Edge

Domed Edge Flat Center

Peaked Dome 

Angled Edge

Large Full Edge Radius Domed Center

Flat Edge Knife Edge

Flat Top Blank
Concave Center PRofile
Design 420
Hooped Profile

Turned Designs


The RTL turning and milling features add a level of band customization limited only by the imagination. The system uses popular designs based on global styles in the industry. With the addition of milling capability and stone pocket milling, the discerning jewelry manufacturer has an array of truly astounding design possibilities at their fingertips. Every design can be made from: 1.0mm wide to 18mm wide. From size 0 to size 22. With the correct holding devices we can even turn and mill bangle designs.

There are 24 basic turned profiles, which can be modified into thousands of different shapes. These shapes can be grooved, milled, drilled or all three.

We also provide instruction to create the programming necessary for unique custom designs. ALL of the bore profiles can be used on any design.